Manufacturing
Could rising angst induce an actual recession? Theoretically, the answer is yes. A sudden drop in confidence can generate a self-fulfilling cycle where rising pessimism leads to less private-sector spending, higher unemployment, lower corporate profits,…
Highlights While a self-fulfilling crisis of confidence that plunges the global economy into recession cannot be excluded, it is far from our base case. Provided the trade war does not spiral out of control, it is highly likely that global equities will outperform bonds over the next 12 months. The auto sector has been the main driver of the global manufacturing slowdown. As automobile output begins to recover later this year, so too will global manufacturing. Go long auto stocks. As a countercyclical currency, the U.S. dollar will weaken once global growth picks up. We expect to upgrade EM and European equities later this year along with cyclical equity sectors such as industrials, energy, and materials. Financials should also benefit from steeper yield curves. We still like gold as a long-term investment. However, the combination of higher bond yields and diminished trade tensions could cause bullion to sell off in the near term. As such, we are closing our tactical long gold trade for a gain of 20.5%. Feature “The Democrats are trying to 'will' the Economy to be bad for purposes of the 2020 Election. Very Selfish!” – @realDonaldTrump, 19 August 2019 8:26 am “The Fake News Media is doing everything they can to crash the economy because they think that will be bad for me and my re-election” – @realDonaldTrump, 15 August 2019 9:52 am Bad Juju Chart 1Spike In Google Searches For The Word Recession President Trump’s remarks, made just a few days after the U.S. yield curve inverted, were no doubt meant to deflect attention away from the trade war, while providing cover for any economic weakness that might occur on his watch. But does the larger point still stand? Google searches for the word “recession” have spiked recently, even though underlying U.S. growth has remained robust (Chart 1). Could rising angst induce an actual recession? Theoretically, the answer is yes. A sudden drop in confidence can generate a self-fulfilling cycle where rising pessimism leads to less private-sector spending, higher unemployment, lower corporate profits, weaker stock prices, and ultimately, even deeper pessimism. Two things make such a vicious cycle more probable in the current environment. First, the value of risk assets is quite high in relation to GDP in many economies (Chart 2). This means that any pullback in equity prices or jump in credit spreads will have an outsized impact on financial conditions. Chart 2The Total Market Value Of Risk Assets Is Elevated Chart 3Not Much Scope To Cut Rates Second, policymakers are currently more constrained in their ability to react to adverse shocks, such as an intensification of the trade war, than in the past. Interest rates in Europe and Japan are already at zero or in negative territory (Chart 3). Even in the U.S., the zero-lower bound constraint – though squishier than once believed – remains a formidable obstacle. Chart 4 shows that the Federal Reserve has cut rates by over five percentage points, on average, during past recessions. It would be impossible to cut rates by that much this time around if the U.S. economy were to experience a major downturn. Chart 4The Fed Is Worried About The Zero Bound Fiscal stimulus could help buttress growth. However, both political and economic considerations are likely to limit the policy response. While China is stimulating its economy, concerns about excessively high debt levels have caused the authorities to adopt a reactive, tentative approach. Japan is set to raise the consumption tax on October 1st. Although a variety of offsetting measures will mitigate the impact on the Japanese economy, the net effect will still be a tightening of fiscal policy. Germany has mused over launching its own Green New Deal, but so far there has been a lot more talk than action. President Trump floated the idea of cutting payroll taxes, only to abandon it once it became clear that the Democrats were unwilling to go along. On The Positive Side Despite these clear risks, we are inclined to maintain our fairly sanguine 12-to-18 month global macro view. There are a number of reasons for this: First, the weakness in global manufacturing over the past 18 months has not infected the much larger service sector (Chart 5). Even in Germany, with its large manufacturing base, the service sector PMI remains above 50, and is actually higher than it was late last year. This suggests that the latest global slowdown is more akin to the 2015-16 episode than the 2007-08 or 2000-01 downturns. Chart 5AThe Service Sector Has Softened Much Less Than Manufacturing (I) Chart 5BThe Service Sector Has Softened Much Less Than Manufacturing (II) Second, manufacturing activity should benefit from a turn in the inventory cycle over the remainder of the year. A slower pace of inventory accumulation shaved 90 basis points off of U.S. growth in the second quarter and is set to knock another 40 basis points from growth in the third quarter, according to the Atlanta Fed GDPNow model. Excluding inventories, U.S. GDP growth would have been 3% in Q2 and is tracking at 2.7% in Q3 – a fairly healthy pace given the weak global backdrop (Chart 6). Chart 6The U.S. Economy Is Still Holding Up Well Outside the U.S., inventories are making a negative contribution to growth (Chart 7). In addition to the official data, this can be seen in the commentary accompanying the Markit manufacturing surveys, which suggest that many firms are liquidating inventories (Box 1). Falling inventory levels imply that sales are outstripping production, a state of affairs that cannot persist indefinitely. Third, and related to the point above, the automobile sector has been the key driver of the global manufacturing slowdown. This is in contrast to 2015-16, when the main culprit was declining energy capex. According to Wards, global vehicle production is down about 10% from year-ago levels, by far the biggest drop since the Great Recession (Chart 8). The drop in automobile production helps explain why the German economy has taken it on the chin recently. Chart 7Inventories Are Making A Negative Contribution To Growth Chart 8Auto Sector: The Culprit Behind The Manufacturing Slowdown Importantly, motor vehicle production growth has fallen more than sales growth, implying that inventory levels are coming down. Despite secular shifts in automobile ownership preferences, there is still plenty of upside to automobile usage. Per capita automobile ownership in China is only one-fifth of what it is in the United States, and one-fourth of what it is in Japan (Chart 9). This suggests that the recent drop in Chinese auto sales will be reversed. As automobile output begins to recover later this year, so too will global manufacturing. Investors should consider going long automobile makers. Chart 10 shows that the All-Country World MSCI automobiles index is trading near its lows on both a forward P/E and price-to-book basis, and sports a juicy dividend yield of nearly 4%.1 Chart 9The Automobile Ownership Rate Is Still Quite Low In China Chart 10Auto Stocks Are A Compelling Buy Fourth, our research has shown that globally, the neutral rate of interest is generally higher than widely believed. This means that monetary policy is currently stimulative, and will become even more accommodative as the Fed and a number of other central banks continue to cut rates. Remember that unemployment rates have been trending lower since the Great Recession and have continued falling even during the latest slowdown, implying that GDP growth has remained above trend (Chart 11). As diminished labor market slack causes inflation to rebound from today’s depressed levels, real policy rates will decline, leading to more spending through the economy. Chart 11Unemployment Rates Keep Trending Lower The Trade War Remains The Biggest Risk The points discussed above will not matter much if the trade war spirals out of control. It is impossible to know what will happen for sure, but we can deduce the likely course of action based on the incentives that both sides face. President Trump has shown a clear tendency in recent weeks to try to de-escalate trade tensions whenever the stock market drops. This is not surprising: Despite his efforts to deflect blame for any selloff on others, he knows full well that many voters will blame him for losses in their 401(k) accounts and for slower domestic growth and rising unemployment. What about the Chinese? An increasing number of pundits have warmed up to the idea that China is more than willing to let the global economy crash if this means that Trump won’t be re-elected. If this is China’s true intention, the Chinese will resist making any deal, and could even try to escalate tensions as the U.S. election approaches. It is an intriguing thesis. However, it is not particularly plausible. U.S. goods exports to China account for 0.5% of U.S. GDP, while Chinese exports to the U.S. account for 3.4% of Chinese GDP. Total manufacturing value-added represents 29% of Chinese GDP, compared to 11% for the United States. There is no way that China could torpedo the U.S. economy without greatly hurting itself first. Any effort by China to undermine Trump’s re-election prospects would invite extreme retaliatory actions, including the invocation of the War Powers Act, which would make it onerous for U.S. companies to continue operating in China. Even if Trump loses the election, he could still wreak a lot of havoc on China during the time he has left in office. Moreover, as Matt Gertken, BCA’s Chief Geopolitical Strategist, has stressed, if Trump were to feel that he could not run for re-election on a strong economy, he would try to position himself as a “War President,” hoping that Americans rally around the flag. That would be a dangerous outcome for China. Chart 12Would China Really Be Better Off Negotiating With A Democrat As President? In any case, it is not clear whether China would be better off with a Democrat as president. The popular betting site PredictIt currently gives Elizabeth Warren a 34% chance of winning, followed by Joe Biden with 26%, and Bernie Sanders with 15% (Chart 12). This means that two far-left candidates with protectionist leanings, who would stress environmental protection and human rights in their negotiations with China, have nearly twice as much support as the former Vice President. All this suggests that China has an incentive to de-escalate the trade war. Given that Trump also has an incentive to put the trade war on hiatus, some sort of détente between the U.S. and China, as well as between the U.S. and other players such as the EU, is more likely than not. Investment Conclusions Provided the trade war does not spiral out of control, it is very likely that global equities will outperform bonds over the next 12 months. Since it might take a few more months for the data on global growth to improve, equities will remain in a choppy range in the near term, before moving higher later this year. As we discussed last week, the equity risk premium is quite high in the U.S., and even higher abroad, where valuations are generally cheaper and interest rates are lower (Chart 13).2 Chart 13AEquity Risk Premia Remain Quite High (I) Chart 13BEquity Risk Premia Remain Quite High (II) The U.S. dollar is a countercyclical currency (Chart 14). If global growth picks up later this year, the greenback should begin to weaken. European and emerging market stocks have typically outperformed the global benchmark in an environment of rising global growth and a weakening dollar (Chart 15). We expect to upgrade EM and European equities – along with more cyclical sectors of the stock market such as industrials, materials, and energy – later this year. Chart 14The U.S. Dollar Is A Countercyclical Currency Chart 15EM And Euro Area Equities Usually Outperform When Global Growth Improves Thanks to the dovish shift by central banks around the world, government bond yields are unlikely to return to their 2018 highs anytime soon. Nevertheless, stronger economic growth should lift long-term yields at the margin, causing yield curves to steepen (Chart 16). Steeper yield curves will benefit beleaguered bank stocks. Chart 16Stronger Economic Growth Should Lift Long-Term Bond Yields, Causing Yield Curves To Steepen Finally, a word on gold: We still like gold as a long-term investment. However, the combination of higher bond yields and diminished trade tensions could cause bullion to sell off in the near term. As such, we are closing our tactical long gold trade for a gain of 20.5%. Peter Berezin, Chief Global Strategist Global Investment Strategy peterb@bcaresearch.com Box 1 Evidence of Inventory Liquidation In The Manufacturing Sector Footnotes 1 The top ten constituents of the MSCI ACWI Automobiles Index are Toyota (22.6%), General Motors (7.8%), Daimler (7.3%), Honda Motor (6.2%), Ford Motor (5.7%), Tesla (4.8%), Volkswagen (4.8%), BMW (3.8%), Ferrari (3.0%), Hyundai Motor (2.4%). 2 Please see Global Investment Strategy Special Report, “TINA To The Rescue?” dated August 23, 2019. Strategy & Market Trends MacroQuant Model And Current Subjective Scores Tactical Trades Strategic Recommendations Closed Trades
This morning, the Flash PMI saw a stabilization in the European manufacturing sector. Euro area manufacturing PMI moved up to 47 from 46.5, and in Germany, it rose to 43.6 from 43.2. In Japan, the manufacturing PMI also stabilized, inching 0.1 points higher…
Highlights Duration: Global manufacturing growth will rebound near the end of this year. Much like in 2016, this will result in higher global bond yields on a 12-month horizon. Investors should keep portfolio duration close to benchmark for now, but be prepared to shift to below-benchmark when our global growth indicators show signs of improvement. Country Allocation: Countries with yield curves furthest away from the effective lower bound also have the most cyclical bond markets. At present, this means that U.S. and Canadian bond markets will perform best if global growth continues to weaken. They will also perform worst in the event of an economic turnaround. Japanese bonds will perform best in a bond bear market, with German debt a close second. Relative Value In Global Government Debt: Changes in the level and shape of global yield curves have altered the relative value opportunities in the global government bond space. We find that the most positive carry (including both yield income and rolldown) in global government bond markets is earned in 30-year German, Japanese and Australian bonds, and in 10-year U.K. and Japanese bonds. Feature Reflexivity Chart 1A Brief Inversion The decline in global bond yields has been unrelenting, and it took on a life of its own last week when the U.S. 2-year/10-year slope briefly inverted (Chart 1). After the inversion, the 30-year U.S. Treasury yield broke below 2% and the 10-year yield broke below 1.50%. The average yield on the 7-10 year Global Treasury Index closed at 0.49% last Thursday, just above its all-time low of 0.48% (Chart 1, bottom panel). There’s an interesting self-fulfilling prophesy that can take hold when the yield curve inverts. Investors interpret the inversion as a signal of weaker economic growth ahead. They then bid up long-dated bond prices causing the curve to invert even more. This sort of circular reasoning can cause bond yields to disconnect from the trends in global economic data, often severely. While recession fears have benefited government bonds, risky assets – equities and corporate bonds – have experienced relatively minor pain. The S&P 500’s recent sell-off pales in comparison to the one seen late last year (Chart 2). Meanwhile, corporate bond spreads remain well below early-2019 peaks. Risky assets have clearly benefited from the drop in bond yields, as markets price-in a future where central banks ease monetary policy in response to weaker economic growth, and where that easing is sufficient to keep equities and credit well supported. Chart 2Low Yields Support Risk Assets I Chart 3Low Yields Support Risk Assets II Further evidence of this dynamic is presented in Chart 3. The chart shows the sensitivity of daily changes in the U.S. 10-year Treasury yield to changes in the S&P 500 for each year since 2010. The sample is split into days when the S&P 500 rose and when it fell. For example, in 2010 the sensitivity on “up days” was 2.6, meaning that on days when the S&P 500 rose, the 10-year yield rose 2.6 basis points for every 1% increase in the S&P 500. Similarly, the sensitivity in 2010 on “down days” was 3.2. This means that the 10-year yield fell 3.2 bps for every 1% drop in the equity index. The main takeaway from Chart 3 is how dramatically the sensitivities have shifted in 2019. The yield sensitivity on “up days” has fallen sharply – down to 0.8. This means that yields barely rise on days when equities move up. Meanwhile, the sensitivity on “down days” has shot higher, to just under 4. This means that yields fall a lot on days when equities sell off. The perception of easier monetary policy has been the main support for risk assets this year. The logical interpretation of these trends is that the perception of easier monetary policy has been the main support for risk assets this year. Global Growth Needed At present, we are stuck in an environment where aggressively easy monetary policy and low bond yields are the sole supports for risky assets. In turn, falling bond yields are stoking concerns about the economy, leading to even easier monetary policy. Only one thing can bust us out of this pattern, and that’s a resurgence of global manufacturing growth. Unfortunately, there is little evidence that this is taking place (Chart 4). The Global Manufacturing PMI is now down to 49.3, below the 2016 trough of 49.9 (Chart 4, top panel). U.S. Industrial Production growth remains weak, but is showing signs of stabilization above the 2016 trough (Chart 4, panel 2). European Industrial Production, on the other hand, continues to contract (Chart 4, panel 3). The downtrend in our favorite real-time indicator of global manufacturing – the CRB Raw Industrials index – remains unbroken (Chart 4, bottom panel). However, even though evidence of a turnaround in global manufacturing is scant, we expect a rebound near the end of this year, for the following reasons: Global financial conditions have eased this year, the result of aggressive central bank stimulus. Financial conditions are easier now than they were in 2018, and much easier than they were prior to the 2015/16 global growth slowdown (Chart 5, top panel). China has started to ease credit conditions in response to U.S. tariffs and the slowdown in growth. So far, stimulus has been tepid relative to 2015/16 levels, but it should ramp up in the coming months.1 Many large important segments of the global economy remain unaffected by the global manufacturing slowdown. The U.S. consumer continues to spend: Core retail sales are growing at a robust 5% year-over-year rate, and consumer sentiment remains elevated (Chart 5, panels 2 & 3). Even in the Eurozone, the service sector has not experienced the same pain as manufacturing (Chart 5, bottom panel). Fiscal policy will remain a tailwind for economic growth this year and next. Last week, there were even rumors of increased fiscal thrust from Germany if the growth slowdown persists.2 Strong inflation readings only increased market worries that the Fed might not be as accommodative as necessary. On the whole, we expect that the above 4 factors will lead to a rebound in global manufacturing growth near the end of this year. Much like in 2016, this will result in higher global bond yields on a 12-month horizon, but the global growth indicators shown in Chart 4 will need to rebound first. Chart 4Global Growth Indicators Chart 5Catalysts For Economic Recovery Inflation Puts Pressure On Powell Chart 6Strong Inflation Could Complicate The Fed's Message Strong U.S. inflation prints during the past two months add an interesting wrinkle to the macro landscape. Core U.S. inflation grew at an annualized rate of 3.55% in July, following an annualized rate of 3.59% in June (Chart 6). However, these strong inflation readings only increased market worries that the Fed might not be as accommodative as necessary. This exacerbated the flattening of the yield curve and sent long-dated TIPS breakeven inflation rates lower. Our sense is that the Fed is chiefly concerned with re-anchoring inflation expectations (Chart 6, bottom panel). This probably means that another rate cut is coming in September, and that Chairman Powell will do his best to sound accommodative in his Jackson Hole address on Friday. However, recent strong inflation data could prompt Powell to sound more hawkish than the market would like, causing yield curves to flatten and risky assets to fall. Bottom Line: Global manufacturing growth will rebound near the end of this year. Much like in 2016, this will result in higher global bond yields on a 12-month horizon. Investors should keep portfolio duration close to benchmark for now, but be prepared to shift to below-benchmark when our global growth indicators show signs of improvement. Country Allocation & The Zero Lower Bound Perhaps the most straightforward way to think about country allocation within a portfolio of developed market government bonds is to classify the different markets as either “high beta” or “low beta”. Chart 7 shows the trailing 3-year sensitivity of major countries’ 7-10 year bond yields relative to the global 7-10 year yield.3 The U.S. and Canada have the highest betas, followed by the U.K. and Australia. Germany has a beta close to one, and Japan’s beta is the lowest. Chart 7Global Yield Beta In other words, if global growth falters and global bond yields decline, U.S. and Canadian bond markets should perform best, followed by the U.K. and Australia. German bonds should perform in line with the global index, and Japanese bonds should underperform the global benchmark. What makes this approach to portfolio allocation even better is that the calculation of trailing betas is not really necessary. A very similar ordering of countries – from “high beta” to “low beta” – is achieved by simply ranking the markets from highest yielding to lowest yielding. High yielding countries, like the U.S. and Canada, have the most room to ease monetary policy in response to a negative growth shock. This means that yields in those countries will respond most to global growth fluctuations. On the other hand, the entire Japanese yield curve is already pinned near the effective lower bound. Even in the event of a negative growth shock, there is little scope for easier Japanese monetary policy, and JGB yields will be relatively unaffected. Chart 8High Beta Countries Are Most Sensitive To Economic Growth It’s interesting to note in Chart 7 that while German yields are actually below JGB yields, bunds remain somewhat less defensive than the Japanese market. This is because the German term structure has only recently moved to the effective lower bound, and investors likely still retain some hope that an improvement in global growth could lead to European policy tightening at some point in the future. This belief is largely absent in Japan, where the term structure has been pinned at the lower bound for many years. Chart 8 provides some further evidence of the split between “high beta” and “low beta” bond markets. It shows that the bond markets with the highest yields are also the most sensitive to trends in global growth, as proxied by the Global Manufacturing PMI. U.S. bond yields are highly correlated with the Global PMI, while Japanese bond yields are hardly correlated at all. It follows that if the slowdown in global growth continues and all nations’ yield curves converge to Japanese levels, then the overall economic sensitivity of global bond yields will decline. Bottom Line: Countries with yield curves furthest away from the effective lower bound also have the most cyclical bond markets. At present, this means that U.S. and Canadian bond markets will perform best if global growth continues to weaken. They will also perform worst in the event of an economic turnaround. Japanese bonds will perform best in a bond bear market, with German debt a close second. Looking For Positive Carry Yield curves have undergone dramatic shifts in recent months, in terms of both level and shape. Not only have curves for the major government bond markets shifted down since the beginning of the year, they also now exhibit varying degrees of a ‘U’ shape (Charts 9A-9F). With that in mind, in this week’s report we look for the best “positive carry” opportunities in global government bond markets. Yield curves for the major government bond markets have shifted down since the beginning of the year, they also now exhibit varying degrees of a ‘U’ shape. We use the term carry to mean the expected return from a given bond assuming an unchanged yield curve. This is essentially the combination of yield income (i.e. coupon return) and the price impact of rolling down (or up) the yield curve. For the purposes of this report, we assume a 12-month investment horizon and incorporate the impact of currency hedging into each security’s yield income. Rolldown ‘U’ shaped yield curves mean that bonds near the base of the ‘U’ currently suffer from negative rolldown, while the rolldown for long maturities is often highly positive. Table 1 shows that rolldown is currently negative for all 2-year bonds, but especially for U.S. and Canadian debt. The U.S. and Canada have the highest policy rates within developed markets, so it’s not surprising that the front-end of their yield curves are also the most steeply inverted. In other words, their yield curves are pricing-in that they have more room to cut rates than other countries. Table 112-Month Rolldown* (%) For A Long Position In Government Bonds In general, rolldown is relatively modest for most 5-year and 7-year maturities. The exceptions being German 5-year debt and Aussie 7-year debt, which benefit from 31 bps and 45 bps of positive rolldown, respectively. As mentioned above, rolldown is currently very positive for long maturity debt. In fact, a 10-year U.K. bond offers a whopping 85 bps of rolldown on a 12-month horizon. Yield Income & Overall Carry As mentioned above, rolldown is only one part of a bond’s carry. The other is the yield an investor earns over the course of the investment horizon – the yield income. Because we assume that investors hedge the currency impact of their bond positions, this yield income also depends on the native currency of the investor. Therefore, we show yield income and overall carry below from the perspective of investors in each of the major currency blocs (USD, EUR, JPY, GBP, CAD, AUD). USD Investors Being the global high yielder, USD investors benefit the most from currency hedging. That is, USD investors earn a lot of additional income on their currency hedges, making non-U.S. bonds look more attractive. Unsurprisingly, carry is most positive at the long-end of yield curves (Tables 2 & 3). Table 2In USD: 12-Month Yield Income* (%) For A Long Position In Government Bonds Table 3In USD: 12-Month Carry (%) For A Long Position In Government Bonds EUR Investors The polar opposite of USD investors, EUR-based investors give up a lot of return through currency hedging. This makes the potential for positive carry much less. In any case, the best positive carry opportunities still lie in German, Japanese and Australian 30-year bonds. U.K. and Japanese 10-year bonds are also attractive (Tables 4 & 5). Table 4In EUR: 12-Month Yield Income* (%) For A Long Position In Government Bonds Table 5In EUR: 12-Month Carry (%) For A Long Position In Government Bonds JPY Investors Yen-based investors currently have more opportunities to earn positive carry than those based in euros. But these opportunities remain confined to long-maturity debt. Once again, the standouts are Japanese, German and Australian 30-year bonds, and also U.K. and Japanese 10-year debt (Tables 6 & 7). Table 6In JPY: 12-Month Yield Income* (%) For A Long Position In Government Bonds Table 7In JPY: 12-Month Carry (%) For A Long Position In Government Bonds GBP Investors Currency hedges work more in favor of GBP than EUR or JPY. As a result, GBP-based investors see more opportunities to earn positive carry (Tables 8 & 9). Table 8In GBP: 12-Month Yield Income* (%) For A Long Position In Government Bonds Table 9In GBP: 12-Month Carry (%) For A Long Position In Government Bonds CAD Investors As with USD-based investors, CAD-based investors also benefit from currency hedging. All securities continue to offer positive carry when hedged into CAD (Tables 10 & 11). Table 10In CAD: 12-Month Yield Income* (%) For A Long Position In Government Bonds Table 11In CAD: 12-Month Carry (%) For A Long Position In Government Bonds AUD Investors AUD-based investors also see positive carry across the entire global bond space, after factoring-in the impact of currency hedging (Tables 12 & 13). Table 12In AUD: 12-Month Yield Income* (%) For A Long Position In Government Bond Table 13In AUD: 12-Month Carry (%) For A Long Position In Government Bonds Bottom Line: Changes in the level and shape of global yield curves have altered the relative value opportunities in the global government bond space. We find that the most positive carry (including both yield income and rolldown) in global government bond markets is earned in 30-year German, Japanese and Australian bonds, and in 10-year U.K. and Japanese bonds. Ryan Swift, U.S. Bond Strategist rswift@bcaresearch.com Footnotes 1 Please see U.S. Bond Strategy Weekly Report, “The Trump Interruption”, dated August 13, 2019, available at usbs.bcaresearch.com 2 https://www.bloomberg.com/news/articles/2019-08-16/germany-ready-to-raise-debt-if-recession-hits-spiegel-reports 3 We calculate betas using average yields from the Bloomberg Barclays Global Treasury Master index. Fixed Income Sector Performance Recommended Portfolio Specification
Highlights The current global trade downtrend has primarily been due to a contraction in Chinese imports. The latter reflects weakness in China's domestic demand in general and capital spending in particular. The current global manufacturing and trade downturns will prove to be drawn out. Several important markets have already experienced technical breakdowns, and a few others are at risk of doing so. EM domestic bonds and EM credit markets could be the last shoe to drop in this EM selloff. Steel, iron ore and coal prices, will all deflate further due to supply outpacing demand in China. Feature In our report last week, we argued that the odds of a liquidation phase in EM are growing. This week’s report continues exploring this theme, offering additional rationale and evidence of a pending breakdown in EM. Trade Tariffs: The Wrong Focus? The media and many investors seem to be solely focused on the impact of U.S. tariffs against imports from China. Yet these tariffs have not been the primary cause of the ongoing global manufacturing and trade recessions. It appears that the headlines and many investors are looking at individual trees and ignoring the forest. Chart I-1Chinese Imports Are Worse Than Exports Global trade contraction and China’s growth slump are not solely due to the trade tariffs imposed by the U.S. but rather stem from weakening domestic demand in China. Chart I-1 illustrates that Chinese aggregate exports are faring much better than imports. If the imposed tariffs were the main culprit behind both weakness in Chinese growth and global trade, mainland exports would have registered a far-greater hit by now than imports. However, they have not yet done so. This entails that U.S. tariffs have so far not had a substantial impact on Chinese and global manufacturing. The key point we would like to emphasize is that the current global trade downtrend has primarily been due to a contraction in Chinese imports. In turn, the accelerating decline in mainland imports is a reflection of relapsing domestic demand in China. The latter has been instigated by lethargic money/credit impulses owing to the government’s 2017-2018 deleveraging campaign and its reluctance to undertake an economy-wide irrigation type stimulus. What’s more, the recent RMB depreciation will likely intensify the Chinese import contraction already underway, as the same amount of yuan will buy less goods priced in U.S. dollars than before (Chart I-2). Given the majority of goods and commodities procured by mainland companies are priced in dollars, suppliers will receive fewer dollars, and their revenue derived from sales to and in China will continue to shrink (Chart I-3). Chart I-2RMB Depreciation Will Depress China's Purchases From Rest Of The World Chart I-3China Is In A Recession From Perspective Of Its Suppliers We do not deny that the trade war has prompted a deterioration in sentiment among Chinese businesses and consumers as well as multinational companies, which in turn has dented both their spending and global trade. We do not see these issues reversing anytime soon. If the imposed tariffs were the main culprit behind both weakness in Chinese growth and global trade, mainland exports would have registered a far-greater hit by now than imports. Chart I-4EM EPS Are Contracting Even though U.S. President Donald Trump is flip-flopping on tariffs and their implementation, barring a major deal between the U.S. and China, business sentiment worldwide will not improve on a dime. In brief, delaying some import tariffs from September to December is unlikely to promote an imminent global trade recovery. The confrontation between the U.S. and China is profoundly not about trade: it is a geopolitical confrontation for global hegemony that will last years if not decades. Businesses in China and CEOs of multinational companies realize this, and they will not change their investment plans on Trump’s latest tweet delaying some tariffs. For now, we do not detect signs of an impending growth turnaround in China’s domestic demand and global trade. Therefore, China-related risk assets, commodities and global cyclicals are at risk of breaking down. Economic Rationale The global trade and manufacturing recession will linger for a while longer, and a recovery is not in the offing: The business cycle in EM/China continues to downshift. Consistently, corporate earnings are already or soon will be contracting in EM, China and the rest of emerging Asia (Chart I-4). EM corporate EPS contraction is broad-based (Chart I-5A and I-5B). The recent declines in oil and base metals prices entail earnings shrinkage for energy and materials companies (Chart I-5B, bottom two panels). Chart I-5AEM EPS Contraction Is Broad Based Chart I-5BEM EPS Contraction Is Broad Based China’s monetary and fiscal stimulus has not yet been sufficient to revive capital spending in general and construction activity in particular (Chart I-6). Chinese household spending is also exhibiting little signs of recovery (Chart I-7). Chart I-6China: Building Construction Is Dwindling Chart I-7China: Consumer Spending Has Not Yet Recovered Domestic demand continues to deteriorate, not only in China but also in other emerging economies, as we documented in our July 25 report. In EM ex-China, imports of capital goods and auto sales are contracting (Chart I-8). High-frequency freight data point to ongoing weakness in shipments in both the U.S. and China (Chart I-9). Chart I-8EM Ex-China: Domestic Demand Is Depressed Bottom Line: The current global manufacturing and trade downturns will prove to be drawn out, and investors should be wary of betting on an impending recovery. This is BCA’s Emerging Markets Strategy view and is different from BCA’s house view which is anticipating an imminent global business cycle recovery. Chart I-9Global Freight Does Not Signal Recovery Breakdown Watch Financial market segments sensitive to the global business cycle have been splintering at the edges. These cracks appear to be proliferating to the center and will render considerable damage to aggregate equity indexes. EM corporate EPS contraction is broad-based. We explained our rationale behind using long-term moving averages to identify significant breakouts and breakdowns in last week’s report. We also highlighted the numerous breakdowns that have already transpired. Today, we supplement the list: EM equity relative performance versus DM has fallen below its previous lows (Chart I-10, top panel). Crucially, emerging Asian stocks’ relative performance versus DM has clearly breached its 2015-2016 lows (Chart I-10, bottom panel). The KOSPI and Chinese H-share indexes have broken below their three-year moving averages (Chart I-11, top two panels). Chart I-10EM Equities Relative Performance Has Broken Down Chinese bank stocks in particular have been responsible for dragging China’s H-share index lower (Chart I-11, bottom panel). In addition, Chinese small-cap stocks dropped below their December low, as have copper prices and our Risk-On versus Safe-Haven currency ratio1 (Chart I-12). Finally, German chemical and industrial share prices such as BASF, Siemens and ThyssenKrupp have decisively broken down (Chart I-13). Chart I-11Breakdowns In Korea And China... Chart I-12...In Commodities Space As Well Chart I-13German Manufacturing Stocks Are In Free Fall This implies that Germany’s manufacturing slowdown is not limited to the auto sector but rather is pervasive. Besides, these companies are greatly exposed to China/EM demand, and their share prices simply reflect the ongoing slump in China/EM capital spending. There are several other market signals that are at a critical technical juncture, and their move lower will confirm our downbeat view on global growth and cyclical markets. In particular: The global stocks-to-U.S. Treasurys ratio has dropped to a critical technical line (Chart I-14, top panel). Failure to hold this defense line would signal considerable downside in global cyclical assets. Similarly, the Chinese stock-to-bond ratio – calculated using total returns of both the MSCI China All-Share index and domestic government bonds – has plunged. The path of least resistance for this ratio might be to the downside (Chart I-14, bottom panel). Given China is the epicenter of the global slowdown, this ratio is of vital importance. The lack of recovery in this ratio signifies lingering downside growth risks. Finally, global cyclical sectors’ relative performance versus defensive ones is sitting on its three-year moving average (Chart I-15). A move lower will qualify as a major breakdown and confirm the absence of a global manufacturing and trade recovery. Chart I-14Global Stocks-To-Bonds Ratio: Sitting On Edge Chart I-15Global Cyclicals Versus Defensives: At A Critical Juncture Bottom Line: Several important markets have already experienced technical breakdowns, and a few others are at risk of doing so. All in all, these provide us with confidence in maintaining our downbeat stance on EM risk assets and currencies. EM Bonds: The Last Shoe To Drop? Although EM share prices are back to their December lows, EM local currency and U.S. dollar bonds have done well this year, benefiting from the indiscriminate global bond market rally. However, there are limits to how far and for how long the performance of EM domestic and U.S. dollar bonds can diverge from EM stocks, currencies and commodities prices (Chart I-16). EM domestic bond yields have plunged close to the 2013 lows they touched prior to the Federal Reserve’s ‘Taper Tantrum’ selloff (Chart I-17, top panel). That said, on a total return basis in common currency terms, the GBI EM domestic bond index has not outperformed U.S. Treasurys, as shown in the bottom panel of Chart I-17. Chart I-16Which Way These Gaps Will Close? Chart I-17EM Domestic Bonds: Poor Risk-Reward Profile Looking forward, EM exchange rates remain critical to the returns of this asset class. With the GBI EM local currency bond index’s yield spread over five-year U.S. Treasurys at about 400 basis points, EM currencies have very little room to depreciate before foreign investors begin experiencing losses. We believe that further RMB depreciation, commodities prices deflation and EM exports contraction all bode ill for EM exchange rates. Consequently, we expect EM local bonds to underperform U.S. Treasurys of similar duration over the next several months. German chemical and industrial share prices such as BASF, Siemens and ThyssenKrupp have decisively broken down. Finally, the euro has begun rapid appreciation versus EM currencies. This will erode EM local bonds’ returns to European investors and trigger a period of outflows. Within this asset class, our overweights are Mexico, Russia, Central Europe, Chile, Korea and Thailand, while we continue to recommend underweight positions in the Philippines, Indonesia, Turkey, South Africa, Brazil, Argentina and Peru within an EM local currency bond portfolio. As to EM credit space (hard currency bonds), these markets are overbought, and investors positioning is heavy. EM currency depreciation and lower commodities prices typically herald widening spreads. Argentina has a large weight in the EM credit indexes, and the crash in Argentine markets could be a trigger for outflows from this asset class. Technically speaking, there are already several negative signposts. The excess returns on EM sovereign and corporate bonds seem to have rolled over, having failed to surpass their early 2018 highs (Chart I-18). Besides, EM sovereign CDS spreads are breaking out (Chart I-19, top panel). Chart I-18EM Credit Markets Is Toppy Chart I-19EM Credit Space Is Entering Selloff Finally, there are noticeable cracks in the emerging Asian corporate credit market. The price index of China’s high-yield property bonds – that account for a very large portion not only of the Chinese but also the emerging Asian corporate bond universes – has petered out at an important technical resistance level (Chart I-19, bottom panel). Further, the relative total return of emerging Asia’s investment-grade corporate bonds against their high-yield peers is correlated with Asia corporate spreads, and presently points to wider spreads (Chart I-20). The rationale is that periods when safer parts of the credit universe outperform the riskier ones are usually associated with widening credit spreads. China’s property market remains vulnerable as the central authorities in Beijing have not provided much housing-related stimulus in the current downtrend. Furthermore, companies in this space are overleveraged, generate poor cash flow and have limited access to credit. The euro has begun rapid appreciation versus EM currencies. This will erode EM local bonds’ returns to European investors and trigger a period of outflows. Overall, Chinese property developers will affect the EM credit space in two ways. First, their credit spreads will likely continue to shoot up, generating investor anxiety and outflows from this asset class. Second, reduced investment by debt-laden and cash-strapped property developers will inflict pain on industrial and materials companies in Asia and beyond. We discuss the outlook for steel, iron ore and coal, which are very exposed to Chinese construction, in the section below. Bottom Line: For asset allocators, we recommend underweighting EM sovereign and corporate credit versus U.S. investment grade, a strategy we have been advocating since August 16, 2017 (Chart I-21). For dedicated portfolios, the list of our overweights and underweights, as always, is presented at the end of the report (page 21). Chart I-20Emerging Asian Corporate Spreads Will Widen Chart I-21Favor U.S. Investment Grade Versus EM Overall Credit As for EM domestic bonds, we continue to recommend betting on yield declines in select countries without taking on currency risk. These include Korea, Chile, Mexico and Russia. We will warm up to this asset class in general when we alter our negative EM currency view. Arthur Budaghyan Chief Emerging Markets Strategist arthurb@bcaresearch.com Chinese Steel, Iron Ore And Coal Markets: Renewed Deflation Chart II-1Is Deflation In Steel And Coal Back? Unlike 2015 when steel, iron ore and coal prices collapsed, in the current downturn they have so far held up reasonably well. They have begun falling only recently (Chart II-1). Even though we do not anticipate a 2015-type Armageddon in steel, iron ore and coal prices, they will deflate further due to supply outpacing demand in China. For both steel and coal, the pace of “de-capacity” reforms in China has diminished considerably, with declining shutdowns of inefficient capacity and rising advanced capacity, as we argued in a couple of reports last year. This has led to a faster growth in supply, while demand has been dwindling with weak economic growth. Lower steel, iron ore and coal prices will harm Chinese and global producers along with their respective countries.2 Steel And Iron Ore First, both crude steel and steel products output will likely grow at a pace of 5-7% (Chart II-2). As the 2016-2020 steel de-capacity target (150 million tons capacity reduction) was already achieved by the end of 2018, the scale of further shutdowns will be limited. In addition, collapsing graphite electrode prices reflect an increased supply of this material. This along with more availability of scrap steel will facilitate the continuing expansion of cleaner technology (electric furnace (EF)) steel capacity and their output in China. The newly added EF steel capacity is planned at about 21 million tons in 2019 (representing 1.8% of official aggregate steel production capacity), slightly lower than the 25 million tons in 2018. Second, we expect steel products demand to grow at 3-5%, slightly weaker than output. Construction accounts for about 55% of Chinese final steel demand, with about 35% stemming from the property market and 20% from infrastructure. The automotive sector contributes about 10% of final Chinese steel demand. All of these end markets are weak and do not yet show signs of revival (Chart II-3). Chart II-2Steel Production In China Chart II-3No Recovery In Chinese Demand Concerning iron ore price, we expect more downside than in steel. Supply disruptions among Brazilian and Australian producers were the main cause for the significant rally in iron ore prices this year. Evidence is that these producers have already resumed their output recovery. Current iron ore prices are still well above marginal production costs of major global iron ore producers. Besides, ongoing large currency depreciation in commodity producing countries will push down their marginal production costs in U.S. dollars terms. This will encourage further supply. As China has increased its use of scrap steel in its crude steel production, the country’s iron ore demand has not grown much. In fact, imports of this raw material have contracted (Chart II-4) As scrap steel prices are currently very low relative to the price of imported iron ore (Chart II-5), steel producers in China will continue to use scrap steel instead of iron ore. Chart II-4China's Imports Of Iron Ore Have Been Shrinking Chart II-5Scrap Steel Is A Cheap Substitute For Iron Ore Coal Chart II-6Coal Output Is Rising, But Beijing's Goal To Reduce Its Usage Chinese coal prices will also be under downward pressure. First, coal output growth will likely slow but will still stand at 2-4% down from a current 6% level (Chart II-6, top panel). The government has set a production goal of 3900 million tons for 2020. Given last year’s output of 3680 million tons, this implies only a 2.9% annual growth rate this year and the next. Second, the demand for both thermal coal and coking coal will likely weaken. They account for 80% and 20% of total coal demand, respectively. About 60% of Chinese coal is used to generate thermal power. As the country continues to promote the use of clean energy, thermal power output growth will likely slow further. Increasing the nation’s reliance on clean energy is an imperative strategic objective for Beijing. Given that thermal coal still accounts for a whopping 70% of electricity production, China will maintain its effort on reducing coal in its energy mix (Chart II-6, bottom panel). In the same vein, the government will continue to replace coal with natural gas in home heating. Finally, Chinese coal import volumes are likely to decline as the nation is increasingly relying on its domestic sources. In particular, the strategic Menghua railway construction will be completed in October. It will be used to transport the commodity from large producers in the north to the coal-deficit provinces in the south. This will reduce the nation’s coal imports, as the transportation cost of shipping domestic coal to the southern power plants will become more competitive than imported coal. Macro And Investment Implications First, companies and economies producing these commodities will face deflationary pressures. These include - but are not limited to - Indonesia, Australia, Brazil and South Africa, as well as steel producers around the world. Second, the RMB depreciation will allow China to gain further market share in the global steel market. In fact, China’s share of global steel output has been rising (Chart II-7, top panel). The bottom panel of Chart II-7 shows that steel production in the world excluding China have actually come to a grinding halt at a time when mainland producers have enjoyed high output growth. Global steel stocks have broken down and global mining equities are heading into a breakdown (Chart II-8). Chart II-7China Has Been Gaining A Share In Global Steel Market Chart II-8Breakdown In Steel And Mining Stocks Finally, we remain bearish on commodities and other global growth sensitive currencies. In particular, we continue shorting the following basket of EM currencies against the U.S. dollar: ZAR, CLP, COP, IDR, MYR and KRW. Ellen JingYuan He, Associate Vice President ellenj@bcaresearch.com Footnotes 1 Average of CAD, AUD, NZD, BRL, CLP & ZAR total return (including carry) indices relative to average of JPY & CHF total returns. 2 This is BCA’s Emerging Markets Strategy view and is different from BCA’s house view. Equities Recommendations Currencies, Fixed-Income And Credit Recommendations
Nominal infrastructure investment growth in China has slowed from over 15% in 2017 to 3% currently. This is the weakest growth rate since 2005 excluding the late 2011-early 2012 period. Over the past decade, each time the Chinese economy experienced a…
Dear Client, Next week I am sending you a Special Report on Japan written by Amr Hanafy, Research Associate of BCA’s Global Asset Allocation service. Amr answers some key questions that clients have been asking about Japan recently: Does the Bank of Japan have any monetary policy ammunition left? How hard will October’s tax hike hit consumption? Has Japan’s corporate governance improved meaningfully? Is there a case for a rerating of Japanese equities? I trust you will find his report very informative. Best regards, Peter Berezin, Chief Global Strategist Highlights Risk assets are likely to struggle over the next few weeks as investors digest both the decision by President Trump to further raise tariffs on Chinese imports, and the realization that the Fed’s “insurance cuts” may not be as generous as they had anticipated. Beyond then, the key question is whether the global economy is, in fact, experiencing a mid-cycle slowdown or is on the brink of a recession. If it is the former, as we think is the case, risk assets will bounce back. Despite the bluster from the Trump Administration, a trade deal between the U.S. and China is still more likely than not. The failure to reach a deal would weaken the U.S. economy, hurting Trump’s reelection prospects. Reassuringly, there is scant evidence that the global manufacturing downturn has infected the service sector to any significant degree. This is true not just for the U.S., but for manufacturing-intensive economies such as Germany as well. The share of manufacturing in both GDP and employment has fallen steadily around the world. Manufacturing output has also become less volatile over time, and less correlated with service sector growth. As global manufacturing activity starts to recover later this year, earnings growth will pick up. Stay overweight global equities relative to bonds on a 12-month horizon, while preparing to increase exposure to EM and European stocks. Feature First The Fed, And Then Trump Risk assets got hit by a one-two punch this week. First, the Federal Reserve dashed investors’ hopes for an extended easing cycle. While the Fed did cut rates by 25 basis points and pledged to end its balance sheet runoff in August (two months earlier than previously indicated), Jay Powell’s characterization of the Fed’s current mantra as a “mid-cycle adjustment to policy” suggested that further cuts were far from guaranteed. To reinforce the point, Powell stated that the Fed was not at “the beginning of a lengthy cutting cycle.” “That’s not our perspective now, our outlook,” he added. Contributing to the hawkish backdrop, Esther George, the president of the Kansas City Fed, and Eric Rosengren, the once fairly dovish president of the Boston Fed, voted to keep rates unchanged. Equities initially plunged on Wednesday following Chair Powell’s press conference. Markets rallied back Thursday morning, only to tumble again in the wake of President Trump’s decision to further raise tariffs on Chinese imports. There is no shortage of theories purporting to explain the timing of Trump’s decision. Was he trying to send a message to the Fed that it had better keep easing? Was he annoyed that Elizabeth Warren, Bernie Sanders, and a number of other presidential contenders tried to outflank him on trade during the Democratic debate the prior evening by suggesting he was not protectionist enough? Regardless, risk assets are likely to struggle over the next few weeks as investors grapple with both renewed trade war anxiety and the realization that the Fed’s “insurance cuts” may not be as generous as they had anticipated. Beyond then, the key question is whether the global economy is, in fact, experiencing a mid-cycle slowdown or is on the brink of a recession. If it is the former, as we think is the case, risk assets will bounce back. While a severe escalation of the trade war would tip the scales towards recession, the risk of such an outcome remains low. Negotiations with China are ongoing. The threat to further raise tariffs in September is consistent with the “maximum pressure” doctrine that has governed Trump’s policy decisions. Ultimately, the failure to reach a trade deal would weaken the U.S. economy, undermining Trump’s reelection prospects. The fact that the latest tranche of tariffs, unlike previous ones, will fall mainly on consumer goods could further hurt Trump in the polls. He does not want that. The Manufacturing Cycle: How Low Will It Go? Chart 1The Global Manufacturing Cycle Has Likely Reached A Bottom Trade tensions have undoubtedly exacerbated the global manufacturing downturn. However, trade policy hasn't been the only culprit, as evidenced by the fact that manufacturing activity began to decelerate even before the trade war heated up in earnest. As we explained in detail last week,1 manufacturing activity tends to follow a “natural cycle” lasting about three years, with output growth rising for the first 18 months, and falling for the next 18 months (Chart 1). The latest downleg began at the start of 2018. Thus, as long as the trade war does not spiral out of control, we should soon see a bottom in the manufacturing cycle based on this timing. For now, the evidence for such a bottom remains mixed. It is encouraging that data released this week showed an improvement in the Chinese Caixin Manufacturing PMI and a slight uptick in the new orders component of the U.S. ISM manufacturing survey. Nevertheless, both surveys remain weak in absolute terms. Meanwhile, the European PMIs have continued to deteriorate, taking the global manufacturing PMI down to 49.3 in July, the lowest level since October 2012. What one can say more definitively is that at least so far, the manufacturing downturn has not infected the service sector to any significant degree (Chart 2). The U.S. non-manufacturing ISM will be released on Monday, but the June reading of 55.1, while below year-ago levels, was still in the middle of its historic range (Chart 3). Chart 2AThe Service Sector Has Softened Much Less Than Manufacturing (I) Chart 2BThe Service Sector Has Softened Much Less Than Manufacturing (II) Chart 3U.S. ISM Non-Manufacturing Still Close To Its Historic Average Strong demand for services has underpinned U.S. employment growth which, in turn, has supported consumption growth. Real PCE rose by 4.3% in Q2. The jump in the Conference Board’s index of consumer confidence in July suggests that U.S. consumers remain upbeat. Notably, the services PMI has increased in the euro area this year, even as the manufacturing sector has weakened there. In Germany, where the manufacturing PMI plunged to 43.2 in July, the non-manufacturing PMI still managed to clock in at 55.4, up from 51.8 in December 2018. Manufacturing: A Canary In The Coal Mine Or Just A Coal Mine? The fact that the overall German economy has not come crashing down despite its high reliance on manufacturing is reassuring. Nevertheless, many investors remain convinced that it is just a matter of time before manufacturing woes precipitate a broad-based economic downturn. Such concerns are well founded if protectionism causes the entire global trading system to come crashing down. However, provided that this does not occur, it is unlikely that slower manufacturing growth, in and of itself, will trigger a recession. Uncertainty over Fed policy and the trade war are likely to weigh on risk assets over the coming weeks. Contrary to conventional wisdom, there is little evidence that manufacturing leads the broader economy. Chart 4 clearly shows that manufacturing output tracks overall real GDP growth, with no clear lead-lag relationship. Chart 4Manufacturing Activity Moves In Sync With The Broad Economy Granted, manufacturing growth is more volatile than GDP growth, but that is simply because of the nature of manufacturing production. More than half of manufacturing output consists of durable goods. Purchases of durable goods tend to be lumpy over time. When unemployment starts to rise, households typically postpone purchases of, say, refrigerators and automobiles, while businesses postpone purchases of capital goods. As inventories pile up, manufacturers respond by cutting output. The opposite happens during expansions. The Declining Role Of Manufacturing In The Economy As a share of GDP, global manufacturing output currently stands at 16%. The manufacturing share has been trending lower in most countries (Chart 5). In the U.S., where the data goes back much further, manufacturing output has declined from over 25% of GDP in the 1950s to 11% of GDP at present. The share of manufacturing jobs in total employment has dropped in tandem (Chart 6). Chart 5The Declining Role Of Manufacturing Is A Global Phenomenon Chart 6The Relative Size Of Manufacturing In The U.S. Economy Has Been Falling The volatility of manufacturing growth rates has also fallen over time. This has occurred partly because of better inventory management techniques. Chart 7 shows that the ratio of real nonfarm inventories-to-domestic sales of goods and structures has been trending lower for the past 40 years. Diminished fears of oil embargos and price controls, which were rampant during the 1970s, have also allowed inventory levels to come down. Chart 7A Structural Decline In The Inventories-To-Sales Ratio Starting In The Early 1980s As manufacturing has become a smaller and less volatile part of the economy, its impact on the service sector has diminished. In fact, we estimate that all of the reduction in the variance of U.S. private sector GDP growth over the past 50 years can be attributed to a smaller contribution from the goods-producing sector, as well as a decline in the correlation between goods-producing and service-producing industries (Chart 8). Investment Conclusions Uncertainty over Fed policy and the trade war are likely to weigh on risk assets over the coming weeks. As long as the trade war does not boil over, global manufacturing activity should recover during the remainder of this year, boosting corporate earnings in the process. More cyclically-oriented stock markets and sectors will benefit the most. Non-U.S. stocks have the advantage of trading at a substantial discount to their U.S. peers. Chart 9 shows that U.S. stocks trade at 17.5-times forward earnings, while non-U.S. stocks trade at only 13.5-times forward earnings. We expect to upgrade European and EM equities over the coming months. Chart 9AEquities: Better Valuations Outside The U.S. (I) Chart 9BEquities: Better Valuations Outside The U.S. (II) Better global growth prospects should cause the dollar to weaken. Stronger growth should also allow government bond yields to rise and yield curves to steepen. Investors should favor stocks over bonds for the next 12 months. Housekeeping: We were stopped out of our long EUR/JPY trade for a loss of 5%. We will consider reopening this trade once market volatility settles down. Peter Berezin, Chief Global Strategist Global Investment Strategy peterb@bcaresearch.com Footnotes 1 Please see Global Investment Strategy Weekly Report, “Three Cycles,” dated July 26, 2019. Strategy & Market Trends MacroQuant Model And Current Subjective Scores Tactical Trades Strategic Recommendations Closed Trades
Feature The global manufacturing cycle looks dire at the moment. Around the world, manufacturing PMIs have fallen, profit growth has slowed, and capex has been reined back (Chart 1). This is clearly a risky moment for the economic expansion (and the equity bull market) which began in 2009. We hear that many clients are having vigorous debates on their investment committees about what to do – and indeed, at BCA, the views of our strategists are unusually divided.1 Recommendations Chart 1Heading Downhill Fast Global Asset Allocation veers towards the optimistic camp. In brief, we expect the services and consumer sectors of major economies to remain robust, and that manufacturing will bottom out in the coming months, partly as a result of easier financial conditions, including the dovish turn by central banks and monetary stimulus in China. But we recognize the risks currently and have constructed our portfolio accordingly. We remain overweight equities versus bonds, but leaven that with an overweight on the most defensive equity market, the U.S. The global economy is a wonderful self-organizing system. The disparity between manufacturing and services is stark everywhere. Both the soft data, such as PMIs (Chart 2), and hard data, such as industrial production and retail sales (Chart 3), show that manufacturing almost everywhere is in recession (the U.S. is not yet, but is perhaps headed that way), but that services growth remains robust. Services have been held up by decent wage growth (even in the manufacturing-heavy eurozone) and generally easier fiscal policy (in the eurozone and China, in particular), which have allowed consumers to continue spending. (In the U.S., the risk of tighter fiscal policy next year has been alleviated by last month’s budget agreement which will produce a small positive fiscal thrust in 2020 – see Chart 4.) Chart 2Service Sector Surveys Look Healthier... Chart 3...Supported By The Hard Data Chart 5China Is The Root Cause The manufacturing recession was clearly triggered by China – it is notable, for instance, that large exporting countries have seen no slowdown in sales to the U.S. but a big drop in those to China (Chart 5). In 2017-18, China slowed as a result of its tighter monetary policy and clamp-down on shadow banking. The countries that have been most affected by the slowdown over the past 18 months are, unsurprisingly then, those which have the largest manufacturing sectors, notably Korea, Germany and Japan (Chart 6). But the global economy is a wonderful self-organizing system. Historically, intra-expansion industrial cycles have typically lasted around 18 months from peak to trough, and 18 months from trough to peak (Chart 7). Lower commodity prices, easier financial conditions, and pent-up demand mean that, after a period of slowdown, demand and risk appetite build up. This self-equilibrating cycle breaks only if there is a major structural imbalance, usually excess debt or rising inflation. As we have argued previously, we do not see clear signs currently that either of these usual structural triggers of recession is present (Chart 8). Chart 7Close To The End Of The Down Wave? Chart 8No Structural Triggers For Recession Chart 9Financial Conditions Have Eased The Fed cut rates on July 31 as a risk management measure, “a mid-cycle adjustment to policy,” as Chair Powell put it in his post-FOMC press conference. With the stock market close to a record high and unemployment at a 50-year low, there is no obvious need for the Fed to implement a full-out easing campaign. But with inflation well below its 2% target, and a risk that the manufacturing slowdown could spill over into consumption (perhaps if companies start to lay off workers – something there is little sign of yet), an “insurance” cut seemed prudent. Financial conditions have eased significantly in the U.S. this year, and somewhat in Europe (Chart 9), and this should soon start to positively affect growth. China’s stimulus remains key. So far it has been half-hearted (Chart 10). This is because Chinese growth has to a degree stabilized, trade negotiations with the U.S. continue, and because the authorities have not abandoned their wish to delever the economy – it is notable that shadow-bank credit creation has not rebounded (Chart 11). Both fiscal and monetary stimulus will need to be ramped up in the second half if we are to see a repeat of 2016’s China-driven risk rally. Investors should see this as a put option – if Chinese growth slows again, and the trade talks break down (both of which are likely), the authorities will roll out a stimulus on the scale of their previous efforts. Chart 10China's Stimulus Is Only Half-Hearted Chart 11Still Clamping Down On Shadow Banks Chart 12Have Stocks Already Discounted A Rebound? What is the biggest risk to our sanguine view? With global stocks up 16% and U.S. stocks 20% year-to-date, the bottoming-out of the manufacturing cycle and greater monetary easing may already be priced in. Chart 12 shows that year-on-year stock market moves typically follow the manufacturing PMIs closely. Even if stock prices remain only at their current level to year-end, they are already discounting a sharp bounce in the PMIs. Fixed Income: If we are right about the macro environment, U.S. Treasury bond yields should rise from their current 2%. Yields usually move in line with consensus GDP forecasts (Chart 13). Economists have cut their 2020 forecast to only 1.8% (from 2.5% for this year). If the 2020 number is revised up, as we expect, Treasury yields have some room to move back up. Moreover, the Fed is unlikely to cut rates twice more by year-end as the futures market implies. Therefore, we stay underweight duration. We have a neutral stance on credit, but this asset class should produce reasonable excess returns over coming quarters given current spreads (Chart 14). U.S. high yield (especially B and below) and eurozone investment grade bonds (which the ECB may start buying again) look attractive. Chart 13Yields Will Rise With GDP Forecasts Chart 14Some Credit Spreads Look Attractive Equities: Given the uncertainties over the timing and strength of Chinese stimulus, we remain cautious on Emerging Markets and euro area stocks, the most obvious beneficiaries of this. Both regions have structural headwinds (excess foreign-currency debt in the case of EM, the fragile banking system and flattening yield curve for Europe) which mean that, even when Chinese stimulus comes, their outperformance may prove short-lived. For now, we prefer U.S. equities, although we recognize that upside for this year is limited. The key will be whether earnings can surprise analysts’ (over cautious) forecast of only 3% EPS growth in 2019. This seems likely since the Q2 earnings season, with almost half of companies having reported, is coming in at close to 80% beats on the bottom line. To hedge against the upside risk of Chinese stimulus, we continue to recommend building a position in Australian equities and in the Industrials sector. China’s stimulus remains key, but so far it has been half-hearted. Currencies: The U.S. dollar is a counter-cyclical currency and should start to depreciate once signs of a manufacturing recovery become apparent. Moreover, the Fed’s dovish move – and the fact that it has significantly more room to ease than other large DM central banks – should also prove to be dollar bearish eventually (Chart 15). One key cross to watch for signs that the global cycle is bottoming is AUD/JPY, since the Australian dollar is a very cyclical, and the Japanese yen a very defensive, currency (Chart 16). Chart 15Dovish Fed Is Dollar Bearish Chart 16Watch AUD/JPY For Signs Of A Bottom Chart 17Oil Has Further To Rise Commodities: We continue to have a bullish outlook for oil. Although developed-world demand growth has slowed slightly this year, OPEC supply constraints mean that inventories should draw down further (Chart 17). We expect Brent crude to average $74 a barrel in 2H2019 (from $65 today). Gold has performed well this year, up 11%. Our colleagues in BCA’s Foreign Exchange Strategy and Commodity & Energy Strategy services conclude that this has largely been because of monetary and financial factors, mostly lower real rates (Chart 18).2 In the coming months, while rates may rise, gold should be helped by a weaker USD. We are neutral on the metal and see it more as an insurance asset. Our FX and Commodity strategists concur with GAA’s long-standing view that gold is a useful portfolio diversification tool to protect against financial, geopolitical, and inflation risks. Garry Evans Chief Global Asset Allocation Strategist garry@bcaresearch.com Footnotes 1 Please see BCA’s Special Report, “What Goes On Between Those Walls? BCA’s Diverging Views In The Open,” dated 19 July 2019, available at www.bcaresearch.com. 2 Please see Commodity & Energy Strategy Special Report, “All That Glitters…And Then Some,” dated 25 July 2019, available at ces.bcaresearch.com. GAA Asset Allocation
The U.S. ISM Manufacturing index fell modestly in July to 51.2 from 51.7 in June, slightly underperforming the consensus forecast of 52.0. The guts of the report were consistent with ongoing deceleration in overall manufacturing activity – the Production…
Global manufacturing activity follows a fairly predictable three-year growth cycle: up for the first 18 months, down for the second 18 months. This is not an immutable law of nature, but it is a handy rule of thumb. The last growth cycle began in the late…

